Click image to view full size image
Model Number: ASUN02
Key Specifications/Special Features:
1.General introduction: this type of powder coating is prepared from the epoxy and polyester resin.It has the merits of the two coatings,which makes the films prepared from this type of coatings more decorative and give it good mechanical properties and anti-corrosive properly. It is widely applied in the coating for indoor metallic appliances.2.Product series: standard and low temperature solidification type powder coatings can be provided, products of different gloss are available, namely, high gloss (above 80%), semi gloss (50-80%), flat gloss (20-50% (gloss can be adjusted according to the customers’ to the demand )3.Physical properties of the powder:Density (g/cm, 25°C);1.4-1.7Granularity distribution: 100% below 100m (can be adapted to the customers’ demand)4.Curing condition: 200°C (workpiece temperature),10 minutes.Average coating rate:8-11㎡/kg, film thickness: 60m (calculated according to 100% consuming of powder coating)
Shipping Information:
- FOB Port: Shanghai
- Lead Time: 7 - 10 days
Main Export Markets:
- Australasia
- Eastern Europe
- North America